10.4 inches (TFT), the replacement of the host backlight (1).Touch panel operation for RGB input modules (Master - from: Mini-B)Adapter for EX module (5 / set)10 CA4-DCMDL-01 PDF. 4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Use external output for the GP3000 series of auxiliary connectors (5 / sets)
CA4-DCMDL-0110.4 inches and above, used to connect the power cord (5 / set).10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set) CA4-DCMDL-01 PDF. For 5.7 inch models, for fixinng the hooks of the three EX modules CA4-DCMDL-01 Manual. Used in a variety of host and man-machine interface for RS-232C connectionAdapter for EX module (5 / set)COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)15 inches, GP installed to the hard panel to provide dust and moisture proof function CA4-DCMDL-01 PDF. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceExpansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationGP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelFor 5 Proface User's Manual. 7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)For 5 Proface User's Manual. 7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).128MB, for the implementation of the picture save, log and data backup annd other data management operations, such as compression flash memory card CA4-DCMDL-01 User's Manual. Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Used to cconvert the USB interface to the serial interface (RS-232C) Proface User's Manual CA4-DCMDL-01 Manual. A modem or bar code reader that can be connected to support RS-232C.