Screen protector CA4-DCMDL-01 Proface CA4-DCMDL-01

2 / setsFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)10.4 inches or larger, when installed to provide the function of dust and moistureB/B+/C FLEX NETWORK Type connector (5)COM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionTouch screen anti ultraviolet protective film (1 pieces) Proface CA4-DCMDL-01 CA4-DCMDL-01 The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display. Length: 3 metersDirect interface Matsushita Electric PLC FP series CPU port Proface CA4-DCMDL-01. 3 / sets10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface.5.7 inches, GP installed to the hard panel to provide dust and moisture proof function Proface CA4-DCMDL-01. Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter CA4-DCMDL-01 Proface. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)A veneer, for the GP4000 series back loading models of full flush (white, 1)Colorful LED switch with USB interface CA4-DCMDL-01 Proface. The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.With a fixed screw of the pre USSB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) CA4-DCMDL-01 Proface CA4-DCMDL-01. Disposable film (5 sheets / sets) for protecting screen against contamination of human commputer interfaceThe main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module Proface CA4-DCMDL-01.