C200HW-COM03-V1 OMRON C200HW-COM03-V1

Product name: N@@S1- type CPU Units with 40 I/O Points.
Specifications: Power Supply, 100 to 240 VAC; Inputs, 24; Outputs, 16;
Output type: Relay.
Program capacity: 8K steps.
memory Data capacity: 8K words.
External powersupply(24 VDC): 0.30A.
Current consumption: 5 V, 0 C200HW-COM03-V1.21A; 24 V，0.09A.
Standards: CE.
The CP1E Programmmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality C200HW-COM03-V1.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. C1000H-SL SYSMAC BUS SYSMAC LINK C1000H-SLK21.
Model: C200HW-COM03-V1.
Specifications: One RS-422/485 port C200HW-COM03-V1.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units.
points Input: 8 inputs.
Signal range selection:
Set separately for each input.
I/O type: R, S, K, J, T, L, B.
Conversion speed: 250 ms/8 inputs.
Externa connection: Removable erminal block OMRON C200HW-COM03-V1.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON C200HW-COM03-V1.
Because of this, no ladder program is required,
at the CPU Unit for scaling OMRON C200HW-COM03-V1.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Unitts can be used together with LCBs/LCUs,
to construct complete process control systems C200HW-COM03-V1.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. C200H Discrete I/O Data Access Console C200H-DAC01