OMRON S8E1-01015D

Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Center roller lever.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement .
Triple-seal construction to provide IEC IP67 degree of protection S8E1-01015D.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) S8E1-01015D
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
Release key type: Special release key.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release S8E1-01015D.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+2NC/1NO.
Conduit opening: M20.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas S8E1-01015D.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection. Model: P2CF (front-mounting), page 23.
Approx: 55 g.
Number of pins: 8 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available. Output: DPDT.
Lighting: LED (with built-in reduced-voltage lighting function).
Operating voltage: 200/220 VAC/VDC.
Pushbuutton colorsymbol: R: redd, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2 S8E1-01015D.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detaachhable Switch S8E1-01015D.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.
S8E1-01015D Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=S8E1-01015D&select=5