OMRON S8E1-01505C

Name: CompoBus/S Master Module.
Model: C200HW-SRM21-V1.
Communications protocol: Dedicated CompoBus/S protocol.

CompoBus/S Master Unit
High-speed ON/OFF Bus Saving Wiring Effort and Manufacturing Steps in Factories.Specification: Metal.
Shaft interior (tolerance *) exterior dia: 6 dia. (Height: 8), 19 . 1 dia.
Couplings.
Coupling Materials and Characteristics S8E1-01505C.
OMRON provides two types of couplings for different S8E1-01505C
application conditions: Resin and metal.
Select the best type for the application. Size: M12, Non-shielded.
Sensing distance: 8.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 34 (48).
Output configuration: NPN S8E1-01505C.
Operation mode NO.
Safe Mounting with Greater .
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Optical system: diffuse type S8E1-01505C.
Detection distance: 350 positive and negative 135mm .
Beam shape: point beam.
Beam diameter: diameter of 240 M.
Resolution: 20 m.
Cable length: 2m. Optical system: diffuse type.
Detection distance: 1500 positive and negative 500mm.
Beam shape: linear beam.
Beam diameter: 40mm * 1.5 m.
Resolution: 500 m.
Cable length: 0.5m. Lock method: Mechanical lock.
Conduit size: M20.
Voltage for solenoid: 24 VDC.
Without indicator 1NC/1NO+ 1NC (Slow-action).
Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation.
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die--cast body incorporating a switch box with,
degree of protection satisfying IP67, UL, and CSA TYPE6P, 13 S8E1-01505C.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key fforr a swinging door are available S8E1-01505C.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.
S8E1-01505C Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=S8E1-01505C&select=5