OMRON S8JX-G05048CD

Ultra Subminiature Basic.
Switch with plenty of.
terminal variations.
Incorporating a snapping mechanism made with,
two highly precise split springs that ensures long durability.
Using insertion molded terminals,
that prevents flux penetration.
In addition to self-clinching PCB, left-angled,
right-angled terminals,
2 types of soldering terminals are available S8JX-G05048CD. Model: C200HW-BI031.
No. of I/O slots: 3 slots S8JX-G05048CDInput type: PNP input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Transistor: -; NPN open collector (HH, H, PASS, L, LL) S8JX-G05048CD.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V .
Digital rotating pulse meter with high speed measurement for 50kHz.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of 50kHz high speed pulse.
Can rotate the encoder and a variety of ON/OFF pulse signal, the highest speed up to 50kHzActuator: Roller plunger.
Conduit size: 1-conduit; Pg13 S8JX-G05048CD. 5.
Built-in switch mechanism: 1NC/1NO MBB(Slow-action) .
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Size: 48 x 96mm.
Category: power AC100 ~ 240V with.
Shell color: black.
Control output 1: output unit mode.
Control output 2: output unit mode.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
The detection function of the broken wire and SSR fault of heater: detection function of single phase or three phase heater.
Event entry point: 2.
Transfer output: transfer output (special terminal).
Remote SP:4 to 20mA input.
Communication: RS-485.
General thermostat new high performance (high resolution, high speed, high precision input) type products.
Support simple operation, preventive maintenance.
A new type of liquid crystal, which can communicate with the front through the infrared port, is adopted,
Visual angle, contrast can be improved.
High resolution 5 bit display / can display 0.01 degrees C.
High speed sampling period 60ms.
All models complete a variety of (to the thermocouple /Pt/ analog input switching), 1 machines to support a variety of sensors.
Also supports remote SP.
Add PV/SV statuss display function, connvenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactive display PV/SV S8JX-G05048CD.
By supporting software (Ver.4.0 CX-Thermo) to carry out a simple function (AND/OR logic and delay),
Be able to execute flexible contact ouutput S8JX-G05048CD.
Increase the control output ON/OFF number counting function, can predict the temperature controller internal relay fault.
Position ratio type.
S8JX-G05048CD Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=S8JX-G05048CD&select=5