OMRON SGE-125L-2-0940 05000C

Number of beams: 52.
Protective height: 1070mm.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Category: external supply 100mA DC5V type .
Input type: load sensor, mV input type SGE-125L-2-0940 05000C.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with SGE-125L-2-0940 05000C
Linear: current; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified SGE-125L-2-0940 05000C.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied toActuator: Cat whisker.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action) SGE-125L-2-0940 05000C.
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards .
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Model: CPM2C-32CDT1C-D. CPU Unit: Units with 32 I/O points.
2 Fujitsu connectors.
Inputs: 16 inputs.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: --.Sensing method: Narrow-beam reflective.
Connection method: Pre-wired.
Sensing distance: 90±30 mmm SGE-125L-2-0940 05000C.
Model: NPPN output .
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spott oof light enables visual checking of sensing,
spot position SGE-125L-2-0940 05000C.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance.
SGE-125L-2-0940 05000C Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGE-125L-2-0940 05000C&select=5