OMRON SGE-225-0-0900L 00100C-00100C

Measure High-speed Up/down Pulses with this.
Up/down Pulse Meter.
Visual conf0rmation of judgement results through display colors that,
switch between red and green.
Perfect for Measuring Rotary Encoder and ON/OFF Pulse Signals at High Speed,
Cumulative pulse input is 50 kHz, quadrature pulse inputs are 25 kHz,
and up/down pulse inputs are 30 kHz SGE-225-0-0900L 00100C-00100C.
Note: No-voltage contacts of up to 30 Hz are supported SGE-225-0-0900L 00100C-00100C
The count value can be converted to any value.
The length equivalent for any pulse can be set to any desired value. This is,
effective for feed amount and position monitor displays.
DeviceNet models added to the series SGE-225-0-0900L 00100C-00100C. Contact type: Standard load (250 VAC, 2 A; 125 VDC 0.4 A).
Operation: Momentary operation (Self-resetting) .
Output: DPDT.
Lighting: Incandescent lamp, 28 VAC/VDC.
Operation Unit color symbol: Enter the desired color symbol for the Pushbutton
n @. R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation SGE-225-0-0900L 00100C-00100C.
Easy panel mounting from the front and simple lamp replacement .
without tools. Terminal: Solder terminal.
Actuator: Panel mount roller plunger.
High-capacity Switch Capable of,
Handling 20 A Loads with Large.
Inrush Currents.
Same shape as OMRON Z Basic Switches except in pin,
plunger position, yet endures inrush currents as large as 75 A. Appearance: Round/Projection type LED lighting,
(without Voltage Reduction Unit)A22L-T.
Output: SPST-NO + SPST-NC.
Lighting: LED.
Operating voltage: 12 VAC/VDC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for eeasily mounting and removing the Switch Unit SGE-225-0-0900L 00100C-00100C.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type SGE-225-0-0900L 00100C-00100C.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
SGE-225-0-0900L 00100C-00100C Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGE-225-0-0900L 00100C-00100C&select=5