OMRON SGE-225-2-1000 05000C

Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed roller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement .
Triple-seal construction to provide IEC IP67 degree of protection SGE-225-2-1000 05000C.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) SGE-225-2-1000 05000C
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Actuator: Roller lever R38.
Item: Hermetic seal, Molded terminals, -139 models, High-precision SGE-225-2-1000 05000C.
Pretravel (PT): 5° .
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads SGE-225-2-1000 05000C.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting .
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Appearance: Round/Small-size Mushroom type (30-dia. head) A22-S.
Output: SPST-NO.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protecttion mechanism on Switch Unit provided as a standard feature SGE-225-2-1000 05000C.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighhteed models) SGE-225-2-1000 05000C. A memory card suitable for Phoenix PCM+3.2 and one of thefollowing Bus Connection Units is required. No PC card is provided with the Unit.
SGE-225-2-1000 05000C Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGE-225-2-1000 05000C&select=5