OMRON SGE-245-0-3900 05000C-05000C

Appearance: Rectangular (M16-T).
Lighting: Incandescent lamp, 12 VAC/VDC.
Degree of protection: IP65 oil-resistant.
Display color symbol: R: red; Y: yellow; G: green; A: blue;
W: white; PY: pure yellow; PW: pure white.
Cylindrical 16-dia. Indicator.
Same basic design as the A16 Pushbutton Switch . Time specification: Instantaneous type SGE-245-0-3900 05000C-05000C.
Current setting range: 8 to 26 A.
Operating voltage: 100/110/120 VAC SGE-245-0-3900 05000C-05000C
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage SGE-245-0-3900 05000C-05000C.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase .
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions SGE-245-0-3900 05000C-05000C. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Specifications: I/O;
PNP (input: - common, output: + common);
Input: 8 points/Output: 8 points.
I/O connections: M3 Screw terminals.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Allows I/O Expansion with Transistor Terminals.
Wide variety of data, such as maintenance system data,
can be collected without aaffectinng the productivity,
of the control system SGE-245-0-3900 05000C-05000C.
Valuable information can be collected,
and managed through the network, including information,
on the communications power supply.
voltage levels, Unit wear and tear,
and equipment operating informattioon SGE-245-0-3900 05000C-05000C.
Expansion via Expansion I/O Units.
With no communications baud rate settings,
required and detachable terminal blocks,
maintenance is easier.
SGE-245-0-3900 05000C-05000C Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=SGE-245-0-3900 05000C-05000C&select=5