OMRON TL-X10E1-4 2M

Model : C500-LK201-V1.
RS-232C/RS-422.Terminal (wire connection): Screw terminal.
Applicable output load: AC load.
Zero cross function: No.
Rated input voltage: DC 24V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel TL-X10E1-4 2M.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals TL-X10E1-4 2M
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability TL-X10E1-4 2M.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires .
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Actuator: Short hinge roller lever.
Type: Standard.
Compact, General-purpose Horizontal TL-X10E1-4 2M.
Switches.
Models for Microloads Added to Series .
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.),
Incorporates a switch with a durable coil spring in a tough,
high precision case.
Compact and uses a single basic switch for applications where,
strength is required.
Models for microloads and models with operation indicators,
added to series.
Terminal protective cover can be switched to wire cable from,
either the left or right.
Sealing characteristics that meet IEC IP67 degree of protection. Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Relay contact: H; PASS1c, L: each 1c.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the presssure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified TL-X10E1-4 2M.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the suub pressure gauge for monitoring the operation trend TL-X10E1-4 2M.
External event input can be applied to a variety of measurement and identification situations.
TL-X10E1-4 2M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=TL-X10E1-4 2M&select=5