OMRON UMM5-0800-0800

Actuator: Pin plunger.
Stable Operation at an Ambient.
Temperature of 400°C.
Incorporates a ceramic insulator, cobalt-alloy spring, and special,
alloy contact, thus ensuring high contact reliability at high.
ambient temperature.
Smoothly operates at an ambient temperature of 400°C. Shape of box: Without flange .
Actuator: Bevel plunger UMM5-0800-0800.
Conduit: Four.
A New Monoblock Multiple Limit Switch UMM5-0800-0800
Incorporating a Head Box with a Tough.
Head and Ensuring High Sealing.
Performance and a Mechanical.
Durability of 5,000,000 Operations.
Used for the sequential control of a variety of engineering.
machines and belt conveyor lines.
Built-in oil filter shuts out oil and water UMM5-0800-0800.
Approved by EN, IEC (Ground terminal models only . ) and,
CCC (Chinese standard). Ask your OMRON representative,
for information on approved models.
Ground terminal models bear the CE mark. Product name: NS12-V2.
Specifications: Effective display area, 12.1-inch *2 TFT LED backlight;
Number of dots, 800 × 600 dots; Ethernet, No; Case color, Ivory.
Standards: UC1, CE, N, L, UL Type4 UMM5-0800-0800.
Even Simpler Equipment Operation with Outstanding Synergy . Size: M8, Non-shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 49 (65).
Output configuration: NPN.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: Square/Projection type LED voltage-reduction lighting,
(with Voltage Reduction Unit) A22L-C.
Output: SPST-NO.
Lighting: LED.
Operating voltage: 200 VAC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ringg) UMM5-0800-0800.
Lever for easily mounting and removing the Switch Unit .
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type UMM5-0800-0800.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
UMM5-0800-0800 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=UMM5-0800-0800&select=5