OMRON WLF2CA2

Optical system: Through-beam.
Measuring width: 10 mm.
Sensing distance: 0 to 500 mm.
Resolution: 4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Actuator: Hinge roller lever.
Economical, High Utility Enclosed Switch .
Enclosed Switches with Built-in Basic Switches for High,
Repeatability and Durability of 10 Million Operations Minimum WLF2CA2
Panel mount versions have the same operating position as,
Z Basic Switch.
Suitable for applications demanding higher mechanical,
strength, dustproof and drip-proof properties than those,
on basic switches.
Resin molded terminal versions are available WLF2CA2.
Approved by UL, CSA, and CCC (Chinese standard) .
(Ask your OMRON representative for information on approved models.). Size: Shielded, M18.
Sensing distance: 5 mm.
Output: Polarity Pin allocations: 1-4.
Operation mode: NO.
Highly Durable Proximity Sensor for.
Tough Environments.
Completely stainless-steel housing.
Aluminum chip immunity.
Embedding installation to metal (steel) fittings WLF2CA2.
Chemical resistance certified by Ecolab Europe .
Lineup includes pre-wire models and DC 3-wire NPN output,
models with fluororesin coating. Field of view: Wide View (Short-distance).
Number of pixels: 350,000 pixels.
Monochrome: PNP.
Field of view/Installation distance: Refer to figure 4 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Appearance: Round/Projection type LED lighting,
(without Voltage Reduction Unit)A22L-T.
Output: SPST-NC.
Lighting: LED.
Operating voltage: 12 VAC/VDC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Usingg a Ring) WLF2CA2.
Lever for easily mounting and removing the Switch Unit .
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type WLF2CA2.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
WLF2CA2 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=WLF2CA2&select=5