OMRON WLSD2-TH

Number of beams: 94.
Protective height: 1905mm.
Model: NPN output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions . A communication gateway that connects smart sensors to CompoNet WLSD2-TH.
High speed intelligent sensor measurement data collection at PLC or PT WLSD2-TH
Only need to connect the communication cable can start.
Trigger measurement and acquisition of the decision result, and a control signal line with no need of wiring. Ratings: 1 A at 30 VDC.
LED indicator: With indicator.
Actuator: Roller plunger WLSD2-TH.
Many Models Including Roller Lever .
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) WLSD2-TH.
Approved by UL and CSA .
(Ask your OMRON representative for Information on approved models.) Control power supply voltage: 200/220 VAC.
Input: DC, Input voltage range, 0.2 to 12 V.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL).
Detect three-phase AC current for under and/or overcur,
rent using current converter.
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable eaasy re,
verse current detecction WLSD2-TH.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F).
LED operation indicator.
UL/CSA approval (SDV-F@). High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type. .
Non polar proximity sensor WLSD2-TH.
Type: DC three wire / wire type.
Shape: non shield, M8.
Detection range: 2mm.
Output configuration: PNP.
Action mode: NC.
WLSD2-TH Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=WLSD2-TH&select=5