OMRON G7L-1A-BUB DC100

Sensor type: BGS (background suppression).
Sensing distance: 100 mm.
Connection method: pre-wired.
Model: NPN output.
A new generation in sensing performance.
Simplicity.
Simple selection.
Simple installation.
One family for all.
All standard applications covered.
A wide variety of models.
Models designed for special applications G7L-1A-BUB DC100.
Non-stop detection.
High quality and reliability.
High EMC protection G7L-1A-BUB DC100
High light immunity.
Robust and waterproof housing. Output: SPDT.
Lighting: LED.
Operating voltage: 12 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; B: black *2.
Item: Momentary operation (Self-resetting) G7L-1A-BUB DC100.
Separate Construction with .
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Type: 1-Conduit.
Contact configuration: Slow-action; 3NC.
Conduit opening/Connector: Pg13 G7L-1A-BUB DC100. 5.
Multi-contact, Labor-saving,
Environment-friendly, Next,
generation Safety-door Switch .
Lineup includes three contact models with 2NC/1NO,
and 3NC contact forms and MBB models in addition,
to the previous contact forms 1NC/1NO, and 2NC.
M12-connector models are available, saving on,
labor and simplifying replacement.
Standardized gold-clad contacts provide high,
contact reliability.
Applicable to both standard loads and microloads.
Variety of metallic heads available. Servo trunk unit.
Product Name: servo relay unit.
Application unit: CS1W/CJ1W-NC__3.
Specification: with communication function support.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and positiion control unit G7L-1A-BUB DC100.
Seervo driver and control signal of position control unit,
Simple wiring on terminal stage .
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaatiion, screw installation of two methods G7L-1A-BUB DC100.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.

G7L-1A-BUB DC100 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=G7L-1A-BUB DC100&select=5