OMRON H3CR-FN DC48-125

Actuator: Adjustable roller lever, form lock (metal lever, resin roller).
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 2NC/1NO MBB (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms .
(Slow-action models with MBB contacts are available H3CR-FN DC48-125. )
M12-connector models are also available, saving on labor and,
simplifying replacement H3CR-FN DC48-125
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only) H3CR-FN DC48-125.
Certified standards: UL, EN (TÜV), and CCC . Open circuit: voltage, no voltage, DC circuit breaker.
Appearance: P5 shell.
Rated current: AC110V.
Rated frequency: 50/60Hz.
Consume VA: action time 5VA below.
Action current adjustment range (zero phase converter primary current):
0.1-0.2-0.3-0.4-0.6A (5 shunt).
Control output: 1C, 1A (voltage output contact);
AC 110V 7.5A cos (AC 250V maximum diameter =0 H3CR-FN DC48-125. 4 825VA),
5000 times 24V 5A L/R=7ms DC (max 125V 25W time DC) 5000 times .
Relay control output for circuit breaker switching.
Quality: about 0.5kg.
External: Mount Searl N1.5.
High voltage grounding relay AGF type, anti wave interference,
Arc grounding, short circuit capability, high reliability.
The anti - interference ability is strong, and can safely correspond to the arc grounding fault.
The grounding relay and the zero phase converter ZCT can be separately used.
(any combination is not more than JIS of the specified error range, and therefore can be used)
Can carry out fine current adjustment, easy to coordinate.
In all the models set up alarm terminal.
Model: CPM2A-60CDR-D. Power supply: DC power supply.
Output type: Relay.
Inputs points: 36 points.
Outputs points: 24 points.Type: Flat Cable.
Terminal Block: Terminal blockk with M3 H3CR-FN DC48-125.5 screws.
Connector: Flat Cable Connectors*1 .
No. of poles: 50.
Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors arre standard H3CR-FN DC48-125.
Terminal blocks available with either M3 or M3.5 screws.
Connecting Cables for Programmable Controllers,
available (sold separately).
H3CR-FN DC48-125 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=H3CR-FN DC48-125&select=5