OMRON H7CX-A11-N

Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Center roller lever.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection H7CX-A11-N.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material H7CX-A11-N
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables H7CX-A11-N.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Size: M30, Shielded.
Sensing distance: 15.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 44 (64) H7CX-A11-N.
Output configuration: NPN .
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Rated voltage: 100 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage.
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0.180 A; 60 Hz, 0.150 A .
Rated input: 50 Hz, 12 W; 60 Hz, 11 W.
Rated rotational speed: 50 Hz, 2500 r/min; 60 Hz, 3000 r/min.
Maximum flow rate: 50 Hz, 0.5 m3/min; 60 Hz, 0.6 m3/min.
Maximum static pressure: 50 Hz, 34.0 Pa; 60 Hz, 49.0 Pa.
Noise: 50 Hz, 33 dB; 60 Hz, 36 dB.
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Pllastic-bladed models (44 ttype) and metal-bladed models,
(28 type) included in series H7CX-A11-N.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certiffieed safety standards depend on the,
product H7CX-A11-N. Check the information given for available models of Axial fans and,
the information in Characteristics.
H7CX-A11-N Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=H7CX-A11-N&select=5