OMRON H7CX-R11W-N

Output: SPDT.
Lighting: Non-lighted.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; B: black *2.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry .
Detachable Switch.
The same contacts can be used for both standard loads and microloads H7CX-R11W-N.
Easy-to-wire terminal arrangement H7CX-R11W-N
Certified for EN 60947-5-1. Specifications: Outputs;
PNP (+ common);
16 points.
I/O connections: MIL connector(Connector with 10-cm cable).
Rated internal circuit power supply voltage:
Supplied from the communications connector H7CX-R11W-N.
Rated I/O power supply voltage: 24 VDC .
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e.g., D-Sub) to,
connect to a wide range of interfaces.
35 x 60 x 80 mm (W x D x H). Appearance: L-shaped.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON H7CX-R11W-N.
Indicator mode: Incident light.
Model: PNP output .
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Name: CompoBus/S Master Module.
Model: C200HW-SRM21-V1.
Communications protocol: Dedicated CompoBus/S protocol.

CompoBus/S Master Unit
High-speed ON/OFF Bus Saving Wiring Effort and Manufacturing Steps in Factories.Time specification: Inverse type.
Current setting range: 20 to 65 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked eeasily because operation time,
is indicated from the start of operation H7CX-R11W-N.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions H7CX-R11W-N. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
H7CX-R11W-N Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=H7CX-R11W-N&select=5