OMRON LY4N AC230

Photomicrosensor with light,
modulation is not influenced by,
external light.
Voltage-output models with wide operating voltage,
range (5 to 24 VDC).
Fitted with an easy-to-adjust optical axis mark.
Easy adjustment and optical axis monitoring with,
a light indicator. Appearance: Square/Projection type LED voltage-reduction lighting,
(with Voltage Reduction Unit) A22L-C LY4N AC230.
Output: SPST-NC.
Lighting: LED LY4N AC230
Operating voltage: 100 VAC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit LY4N AC230.
Increase wiring efficiency with three-row mounting of Switch Blocks .
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Separate Construction with LY4N AC230.
Cylindrical 16-dia . Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Wire length: 4m.
Screw switch: M6.
Temperature sensing part of temperature controller.
In the application field of packaging molding machine is widely used,
Further strengthened the high cost models.
Easy to install / replace the structure.
With springs, you can use the active part (E52Z-CA1D-40). Power supply: 3 phase 3 line rated voltage 500V AC.
Rated current: 100A.
Weight: 8.4KG.
Used to reduce the noise generated by the inverter.
Try to be close to the transducer for connection. Application: General applications for purified water,
For 5-pole electrode (2-wire).
Separate Electrode Holders for Water.
Supply and Drainage Control in Buildings LY4N AC230.
Small, Lightwweight Electrode Holders for,
Use as Built-in Components .
The PS-@S(R) are separate Electrode Holders that allow the,
Electrodes to be withdrawn easily for inspection.
The PS-@S(R) come in 3, 4, or 5 pole models for supply and,
drainage of tapp wwater in buildings LY4N AC230.
PS-31 is a small and light-weight Electrode Holder that is,
suitable for installation in limited space and built-in components.
LY4N AC230 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=LY4N AC230&select=5