OMRON A22L-GA-T2-10A

Model: C200H-B7A02.
I/O points: 32 output points.
Weight: 300g max.Ratings: 1 A at 30 VDC.
LED indicator: Without indicator.
Actuator: Sealed crossroller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting .
of up to 6 Switches.
Cable connectors for easy Switch replacement A22L-GA-T2-10A.
Triple-seal construction to provide IEC IP67 degree of protection A22L-GA-T2-10A
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
Unit classification: CJ1 CPU Bus Units A22L-GA-T2-10A.
Product name: Motion Control Unit with,
MECHA TROLINK-II interface .
Specifications: Control modes : Position,
speed, or torque control via MECHATROLINK-II,
Control axes : 32 axes max. (30 physical axes,
2 virtua axes).
Internal programming language: Special motion contro
language
No. of unit numbers allocated: 1.
Current consumption: 5V, 0 A22L-GA-T2-10A. 60A; 24V, --.
Standards: UC1, CE.
Improve Equipment Design Efficiency,
and Shorten Tact Time .
Control Servos for up to 16 axes in,
a motion network with one Position,
Control Unit that supports MECHATROLINK-II.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association. Output: SPDT.
Lighting: LED.
Operating voltage: 12 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; B: black *2.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microoloads A22L-GA-T2-10A.
Easy-to-wire terminal arrangement .
Certified for EN 60947-5-1. Protection tube diameter: screw pitch M6.
Wire length: 4m.
Core line type: K (CA).
Temperature sensing part of temperature controller.
In the application field of packaging molding machine is wideelyy used,
Further strengthened the high cost models A22L-GA-T2-10A.
Easy to install / replace the structure.
With springs, you can use the active part (E52Z-CA1D-40).
A22L-GA-T2-10A Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=A22L-GA-T2-10A&select=5