Terminal/mounting: Plug-in/DIN rail via socket.
Control voltage: 100/110/120 VAC.
Under current detection: Instantaneous type.
Solid-state, Plug-in Current Sensor.
Applicable to motor overcurrent protection and 3-phase AC current detection.
Inverse-type, start-up lock type, and instantaneous type over,
current sensors available .
Instantaneous type under current sensor available A22W-2AA-24A-02.
Plug-in design simplifies installation, removal, and wiring
A22W-2AA-24A-02
DIN sized (48 mm x 96 mm). Shape of box: Without flange.
Actuator: Bevel plunger.
Conduit: Four.
A New Monoblock Multiple Limit Switch.
Incorporating a Head Box with a Tough.
Head and Ensuring High Sealing A22W-2AA-24A-02.
Performance and a Mechanical.
Durability of 5,000,000 Operations .
Used for the sequential control of a variety of engineering.
machines and belt conveyor lines.
Built-in oil filter shuts out oil and water.
Approved by EN, IEC (Ground terminal models only.) and,
CCC (Chinese standard). Ask your OMRON representative,
for information on approved models.
Ground terminal models bear the CE mark A22W-2AA-24A-02. Size: M8, Shielded.
Sensing distance: 2 . 0 mm.
Connection: M12 connector.
Body material: Stainless steel.
Thread length (overall length): 27 (43).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Operating: Appearance, 40-dia. head Medium Push-pull A22E-MP;
Contact Configuration, 1NC.
Color of cap: Red.
Install in 22-dia. or 25-dia. Panel Cutout.
Direct opening mechanism to open the circuit when the contact welds.
Safety lock mechanism prevents operating errors.
Easy mounting and removal of Switch Blocks using a lever.
Mount three Switch Units in series to improve wiringg efficiency,
(with non-lighted Switch Units, three Units can be mounted for,
multiple contacts) A22W-2AA-24A-02.
Finger protection mechanism on Switch Unit provided as a,
standard feature.
Install using either round, or forked crimp terminals.
Oil-resistant to IP65 (non-lighteed models)/IP65 (lighted models),
A lock plate is provided as a standard feature to ensure that the,
control box and switch are not easily separated A22W-2AA-24A-02.
A22W-2AA-24A-02 Operation manual / Instructions / Catalog download link:
/searchDownload.html?Search=A22W-2AA-24A-02&select=5