OMRON A6A-16CS

E32-D331 type: special beam type; ultra small / small diameter beam,
Specialty: Phi 0.5 casing,
Bending radius (mm): R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsActuator: Roller lever: R38.
Item: High-precision.
Connector shape: Threaded (M12) .
Built-in switch type: General-purpose A6A-16CS.
Voltage: DC.
Wiring locations: NO only 2 core.
Connector pin No: NO 1 4 A6A-16CS
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches.
Standard-feature gold-clad crossbar contacts provide high reliability A6A-16CS.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models. Size: M12, Shielded.
Sensing distance: 4.0 mm A6A-16CS.
Connection: Pre-wired.
Body material: Brass .
Thread length (overall length): 56 (72).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. General-purpose Absolute Encoder.
with External Diameter of 50 mm.
Absolute model.
External diameter of 50 mm.
Resolution: 256 (8-bit).
Lightweight construction using plastic body. Model: C200H-MD215.
No. of I/O pts: 16 inputs, 16 outputs.
Specifications: 24VDC.Appearance: Round/Full-guard type A22-G.
Output: SPST-NC + SPST-NC.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring) A6A-16CS.
Lever for easily mounting and removing the Switch Unit .
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type A6A-16CS.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
A6A-16CS Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=A6A-16CS&select=5