OMRON D4C-1224 NTC

Corresponding thermocouple type: J (IC).
Purpose: heat resistant.
Symbol: JX-2-H.
Outside: all glass fiber outer wrapping stainless steel shielding layer.
Structure (element number / element diameter): 7/0.32.
Temperature range: - 20 ~ 9150.
Tolerance: plus or minus 140 mu V.
Appearance color: yellow .
A variety of high precision temperature sensor series D4C-1224 NTC.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours D4C-1224 NTC
A temperature sensor is used as a thermal sensor for a thermostat.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals D4C-1224 NTC. Appearance: Rectangular (M16-J) .
Lighting: LED without Voltage Reduction Unit, 5 VDC.
Degree of protection: IP65 oil-resistant.
Display color symbol: R: red; Y: yellow; G: green; A: blue;
W: white; PY: pure yellow; PW: pure white.
Cylindrical 16-dia. Indicator.
Same basic design as the A16 Pushbutton Switch. Size: 48 x 96mm.
Control output 1: voltage output (SSR driver) D4C-1224 NTC.
Control output 2:--.
Auxiliary output: 2 independent points .
Power supply voltage: AC/DC24V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: 1 points.
Communication: -.
Event input: 4 points.
Remote SP input: -.
Transfer output: -.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point evvent input,
1 point traansfer output and remote SP input, suitable for a wide range of applications D4C-1224 NTC.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperratture controller is connected to each other by using the component communication D4C-1224 NTC.
A new type of proportional control allows you to control the valve.
D4C-1224 NTC Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=D4C-1224 NTC&select=5