Proface GLC2300-FNCN01

Type: there is an emergency stop switch (gray) and a key switch.
Display type: TFT color LCD.
Display size: 5.7 inch.
Display color: 65536 color (no flicker), 16384 color (flashing).
Resolution (pixel) x:640 480 (VGA).
Memory: 32MB.
Data backup: 320KB SRAM.
Emergency stop switch provides 3 colors of red, yellow and grey .
3 position enable switch with forced contact disconnect function GLC2300-FNCN01.
Key switch without pressing the emergency stop switch can also be mobile devices GLC2300-FNCN01
Very light.
The high visibility of the configuration of the 65536 color TFT color LCD.
High definition and wide viewing angle to bring excellent visual effects.
Easily replace GP3000H series GLC2300-FNCN01. Used to connect the SIEMENS S5 PLC series to the host computer interfaceThe man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port . "Size: 5.7 inches.
Display type: STN pseudo color LCD.
Resolution: 320 x 240 pixels (QVGA).
Display color: 256 color (no flash) /64 color (3 speed flicker).
Power supply: DC24V.
Interface: USB (TYPE-A), RS-232C, RS-422/485 (MPI) GLC2300-FNCN01.
Brightness adjustment: 8 level adjustment can be carried out by touch panel .
You can easily and intuitively set the address by dragging and dropping the mouse.
In addition, click on the use of the address can be displayed on the screen number and part number.
Click the part number to jump to the screen using the widget.
The same software supports all 3000 series of Pro-face man-machine interface.
From the screen to create the programming, the functions are simple and easy to use.
Learn a software, master all the skills.
Support efficient image creation.
ID management and operation log reduces downtime.
Improve the operation mode, reduce the cost and workload.
Analysis of failure causes according to the operation log.
Check register status on historical trend chart.
Drag and drop functionality makes the software interface easier to operate.
A variety of components to provide a variety of components, easy to create a beautiful picture.
In addition, there are a variety of 256 color components can be used.
Using the alarm log to quickly check and display the alarm message and register value, it is easier to find the cause of the fault.
Register value will be recorded when the alarm is issued.
Therefore, the state of the register and its value can be obtained while acquiring the alarm message.
A comparison of the data is helpful to find the cause of tthe fault GLC2300-FNCN01.
These "sampple parts" can be used directly, and the design time is greatly reduced .
According to ID number of easy access to the operation log, through the analysis of the operation to improve production efficiency.
Use ID based on the number of authorized moodee of operation, can be recorded when, who performed the operation GLC2300-FNCN01.
Using this data, you can analyze the causes of all the faults that have occurred. "
GLC2300-FNCN01 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=GLC2300-FNCN01&select=5