MITSUBISHI HC-UF72B

Superior high efficiency IPM motor.
Output power: 5.5kw.
Rated speed: 1500r/min.
Voltage level: 200V.
IPM motor MM-EFS series can not be used to run the power frequency power.
The total wiring length of the IPM motor shall not exceed 100m.
1 inverters can not connect multiple IPM motors at the same time . MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series HC-UF72B.
Rated output: 2.0kw.
Interface type: SSCNET type III fiber communication HC-UF72B
Special specification: suitable for linear servo motor.
Power specification: three phase AC400V.
More advanced real-time automatic tuning by setting response values,
Including the position gain and the gain of speed, all the gain can be adjusted automatically HC-UF72B.
32 segment response level can be set.
Advanced vibration suppression control.
An optimal vibration control filter value is automatically set by the automatic tuning function to effectively suppress the vibration of the 100Hz frequency that occurs when the driving part stops.
The automatic tuning function can effectively restrain the vibration of the end of the mechanical arm and reduce the residual vibration in the machine HC-UF72B. PCI bus /PCI-X bus.
Support Japanese, English OS.
Multimode fiber optic cable.
Dual loop controller network (control station / common station).
DB A20 AnyWire system uses a separate transmission mode,
Sensor networks to achieve high speed and high reliability.
The transmission distance of 50m/200m/1km/3km can be selected.
1 modules can be up to 512 points of the input, 512 points of output (standard setting).
Even branch wiring, but also to detect transmission lines.
Province distribution network module in cabinet and device.
Link to connect the 64 stations when the fastest scanning time for 1.2ms (rate 2.5Mbps).
According to the transmission distance, the transmission rate is selected from 2.5Mbps, 625kbps and 156kbps.
CC-Link/LT from the station does not need any parameter settings.
Only need to set up the transmission speed in the master module, you can use the remote I/O.
I/O control in the first class of open field network module.
CC-Link bassed on reliable field bus teechnology,
Able to transmit large number of bits data (such as ON/OFF information) and word data (such as analog information) HC-UF72B.
Consistency of CC-Link to maintain loop transmission,
And the cycle of transmission and information (instantaneous transmmisssion) communication separately, so as to ensure the timeliness of HC-UF72B.
Even if the information reaches saturation, it will not affect the link scan time.
HC-UF72B Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=HC-UF72B&select=5