Proface PL-RC500

The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.Input voltage: DC24V.
Screen size: 7.5 inches.
Display type (resolution):65536 color TFT (VGA 640 x 480 pixels).
Touch panel type: analog resistance .
Memory: 32MB (internal memory), SRAM320KB (backup memory), SRAM64KB (variable area) PL-RC500.
Ethernet interface: 1 PL-RC500
Serial port: RS-232C * 1, RS-422/485 * 1.
SD card slot (max 32GB):1.
USB interface: Type-A x (2) USB 1, Mini-B USB (2) x 1.
Replaceable battery: yes.
Alarm analysis function block: yes.
Panel opening size:
Wide 204.5 x high 159.5mm (+1/0mm).
Panel thickness: 1 PL-RC500. 6-5mm, chamfer radius is less than R3 .
Meet a number of standards to support a wide range of applications
The coating components are widely used in various working environments, and are in line with the international standards.
Remote data acquisition and management.
Human machine interface, which is installed on the production machine,
With EX Microsoft software combined with Office Pro-Server and SQL and other standard PC software,
Can be simple and economical to establish a set of data management system, and effectively improve the quality of production and efficiency PL-RC500. 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.Output points: 1 points.
Rated output voltage range: voltage output: 0 to 10V, current input: 4 to 20mA.
Resolution: 12. When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).GP4000E series entry-level programmable man-machine interface.
Screen size: 10 inch widescreen.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot, vision sensor, etc..
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery.
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connecteed with other controllers (SSCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC PL-RC500.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intruusiion PL-RC500.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.
PL-RC500 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=PL-RC500&select=5