OMRON 3G3MX2-AB004-Z

I/O Interface UnitIdeal for Voltage Monitoring for.
Industrial Facilities and Equipment.
Monitor for overvoltages and undervoltages simultaneously.
Separate settings and outputs supported for overvoltages and undervoltages.
Manual resetting and automatically resetting supported by one Relay.
Pre-alarm Monitoring Mode .
Two SPDT output relays, 5 A at 250 VAC (resistive load) 3G3MX2-AB004-Z.
Process control signal (0 to 10 V) and current splitter input supported 3G3MX2-AB004-Z
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported.
Inputs are isolated from the power supply. Model: CPM2C-20EDR. Units with 20 I/O points.
1 I/O terminal block 3G3MX2-AB004-Z.
Inputs: 12 inputs.
Outputs: 8 outputs .
Input type: 24 VDC.
Output type: relay.No. of cable cores: 4.
Cable connection direction: Straight (socket)/Right-angle (plug).
Cable length L: 5 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch 3G3MX2-AB004-Z.
Ideal for a wide variety of FA and OA applications .
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Number of beams: 88.
Protective height: 1760mm.
Safety Light Curtains with Durable,
Impact-resistant Body and Long,
20-m Sensing Distance.
MS/MSF4800A Advanced Series.
Programming and Diagnostics Module (PDM) makes it easy,
to set functions.
Series connection is possible only with the MSF4800A.
Blanking can be set.
Muting is possible only with the MSF4800A by using the,
MS4800-RM6 Resource Module.
MS/MSF4800B Basic Series,
Features all necessary basic Safety Light Curtain functions.
Series connection is possible only with the MSF4800B.
Programming and Diagnostics Module (PDM) makes it easy,
to set functions. Sensing method: Narrow-beam reflective.
Connection method: Connector (M8, 4pins).
Sensing distance:: 90±30 mm 3G3MX2-AB004-Z.
Model: NPPN output .
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spott oof light enables visual checking of sensing,
spot position 3G3MX2-AB004-Z.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance.
3G3MX2-AB004-Z Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=3G3MX2-AB004-Z&select=5