OMRON 44502-0110 HP6009-021SN

Setting range: 2 to 20 mA AC/DC, 10 to 100 mA AC/DC, 50 to 500 mA AC/DC.
Power supply voltage: 24 VAC/DC.
Ideal for Current Monitoring for.
Industrial Facilities and Equipment.
Monitor for overcurrents and undercurrents simultaneously.
Separate settings and outputs supported for overcurrents and undercurrents .
Use commercially available CTs (CT current on secondary,
side: 0 to 1 A or 0 to 5 A) 44502-0110 HP6009-021SN
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately.
Two sets of SPDT output contacts, 5 A at 250 VAC (resistive load).
Output status can be monitored using LED indicator 44502-0110 HP6009-021SN.
Inputs are isolated from the power supply. The 8 round series .
And button switch A3D series of the same.
High brightness uniform surface luminescence.
Because it is round, so easy to punch. Isolation: Photocoupler.
Zero cross function: Yes.
Indicator: Yes(Yellow).
Applicable output load (See note 1.): 75 A at 24 to 240 VAC(See note 2.).
Rated input voltage: 100 to 120 VAC 44502-0110 HP6009-021SN.
Wide Lineup of General-purpose Solid State.
Relays with Applicable Loads of 5 to 90 A .
AC Output Relays with 75-A and 90-A output currents have been,
added to the G3NA Series.
All models feature the same compact dimensions to provide a,
uniform mounting pitch.
Built-in varistor effectively absorbs external surges.
(except G3NA-D210B).
Operation indicator enables monitoring operation.
Protective cover for greater safety.
Standard models certified by UL and CSA and -UTU models by TÜV.
(except G3NA-410B, G3NA-420B, and G3NA-440B(-2)). Lock method: Solenoid lock.
Conduit size: G1/2.
Voltage for solenoid: 24 VDC.
With LED indicator 2NC+ 1NC (Slow-action).
Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation.
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die-cast body inncorporating a switch box with,
degree of protection satisfying IP67, UL, and CSA TYPE6P, 13 44502-0110 HP6009-021SN.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key fforr a swinging door are available 44502-0110 HP6009-021SN.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.
44502-0110 HP6009-021SN Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=44502-0110 HP6009-021SN&select=5