OMRON 70066-1195 KEX14(V)

Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed roller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement .
Triple-seal construction to provide IEC IP67 degree of protection 70066-1195 KEX14(V).
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) 70066-1195 KEX14(V)
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) No. of notches: 2 notches.
Output: SPDT.
Reset method: Manual 70066-1195 KEX14(V).
Lighting method: Non-lighted.
Separate Construction with Cylindrical .
16-dia. Body.
Same separate construction as the A16-series Pushbuttons with,
Miniature Design of 28.5 mm.
The same contacts can be used for both standard loads and,
microloads.
Oil-resistant IP65 models,
Conforms to EN60947-5-1. Sensor type and connection: 3 line DC (PNP) /2 line 1-4 DC.
Actuator connection: actuator connection 3-4 70066-1195 KEX14(V).
Port number: 4.
Cable length: 5m.
This series contains the optimal control case of the new thin,
Light connector terminal box, has better,
Environmental resistance and centralized management of I/O sensor connector,
Therefore, less artificial .
Wear resistant thin, protection grade can reach IP67.
Suitable for photoelectric sensor,
Proximity sensor and sensor with I/O connector (M12) limit switch.
In addition, due to the increase of the rated current, the ground terminal is increased,
So it can support and connect the valve solenoid.
Contains power and action indicator light.
No matter how many ports are used, the installation method is used,
To ensure that the system can be easily expanded. Appearance: Round/Half-guard type A22-H.
Output: SPST-NO + SPST-NC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
LLever for easily mounting and removing the Switch Unit 70066-1195 KEX14(V).
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounteed using either open-type (fork-type) or closed-type 70066-1195 KEX14(V).
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models).
70066-1195 KEX14(V) Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=70066-1195 KEX14(V)&select=5