OMRON 70098-1365 SCS-2525-4-2000 020

Lock method: Solenoid lock.
Conduit size: PG13.5.
Voltage for solenoid: 24 VDC.
Without indicator 2NC+ 1NC (Slow-action).
Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation .
Key is inserted 70098-1365 SCS-2525-4-2000 020. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid 70098-1365 SCS-2525-4-2000 020
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened 70098-1365 SCS-2525-4-2000 020.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch .
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die-cast body incorporating a switch box with,
degree of protection satisfying IP67, UL, and CSA TYPE6P, 13.
Equipped with a horizontal and vertical conduit opening 70098-1365 SCS-2525-4-2000 020.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key for a swinging door are available .
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions. Type: 1-Conduit (High pull-force type).
Contact configuration: Slow-action; 1NC/1NO.
Conduit opening/Connector: G1/2.
Multi-contact, Labor-saving,
Environment-friendly, Next,
generation Safety-door Switch.
Lineup includes three contact models with 2NC/1NO,
and 3NC contact forms and MBB models in addition,
to the previous contact forms 1NC/1NO, and 2NC.
M12-connector models are available, saving on,
labor and simplifying replacement.
Standardized gold-clad contacts provide high,
contact reliability.
Applicable to both standard loads and microloads.
Variety of metallic heads available. Time specification: Inverse type.
Current setting range: 20 to 65 A.
Operating voltage: 400/440 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operaation time,
is indicated from the start of operation 70098-1365 SCS-2525-4-2000 020.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, annd load conditions 70098-1365 SCS-2525-4-2000 020. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.
70098-1365 SCS-2525-4-2000 020 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=70098-1365 SCS-2525-4-2000 020&select=5