OMRON 70177-1017 SGE-225-0-1200 0500

Cable length L: A, 5.0 m; B, 4.75 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Appearance: F-shaped.
Sensing method: Through beam type (with slot).
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width) .
Operating mode: Dark-ON/Light-ON (2 outputs) 70177-1017 SGE-225-0-1200 0500.
Indicator mode: Incident light.
Model: NPN output 70177-1017 SGE-225-0-1200 0500
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON 70177-1017 SGE-225-0-1200 0500.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection .
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors. Actuator: Roller plunger 70177-1017 SGE-225-0-1200 0500.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 1NC/1NO(Snap-action) .
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Three-phase Phaase-seequence Phase-loss 70177-1017 SGE-225-0-1200 0500.
Relay Using Voltage Detection Method.
Greater resistance to inverter noise.
Distinguishes between correct phases, phase sequence, and phase,
loss when power is turned ON.
Supports phase loss detection when the motor is operratting 70177-1017 SGE-225-0-1200 0500.
5 A (resistive load) at 250 VAC, DPDT x 1.
Output status can be monitored using LED indicator.
Ideal to prevent reverse operation of motors.
70177-1017 SGE-225-0-1200 0500 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=70177-1017 SGE-225-0-1200 0500&select=5