OMRON 70193-1056 MC47-20-300-R

Model: PT (back-mounting), page 18, Solder terminals.
Approx: 11 g.
Number of pins: 8 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available .
New screwless models available. Ratings: Standard load; 4 A at 30 VDC 70193-1056 MC47-20-300-R.
Cable: VCTF cable *2.
Actuator: Sealed pin plunger 70193-1056 MC47-20-300-R
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection 70193-1056 MC47-20-300-R.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material .
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers 70193-1056 MC47-20-300-R.
Models with red LED indicators added to series for easy,
confirmation of operation .
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Actuator: Plunger.
Conduit size: 1-conduit; Pg13.5.
Built-in switch mechanism: 3NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contactss provide hiigh contact reliability 70193-1056 MC47-20-300-R.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Nozzle gap.
Optical system: positive and negative radiattioon 70193-1056 MC47-20-300-R.
Detection distance: 10 positive and negative 0.5mm.
Beam shape: linear beam.
Beam diameter: 900mm * 25 M.
Resolution: 0.25 M.
Cable length: 0.5m.
70193-1056 MC47-20-300-R Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=70193-1056 MC47-20-300-R&select=5