OMRON 70261-1136 SGE-1510-0-4880A 00

C500-OA I/O Unit Triac Output 16 pts C500-OA121(3G2A5-OA121).
AC132V 1A.Type: 1C contact type.
Shape: round.
Terminal shape: solder terminal.
Action: alternate.
Display mode: do not display.
Operation Department color: blue.
Large capacity compact type push button switch.
Can also be used as a power switch with a large capacity cut 70261-1136 SGE-1510-0-4880A 00.
Can be switched from micro load (minimum applicable load 1mA DC5V) to large capacity load 70261-1136 SGE-1510-0-4880A 00 Cable length L: A, 1.5 m; B, 1.25 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Product name: CS1 Expansion Backplanes 70261-1136 SGE-1510-0-4880A 00.
Specifications: For CS-series,
Unit only Note: C200H series,
Units cannot be mounted; 5 slots .
Mountable configuration units:
Basic I/O Units, CS-series Basic I/O Unit,
Yes; C200H series Basic I/O Unit, No;
C200H Group-2 High density I/O Unit, No.
Special I/O Units: CS-series Special I/O Unit,
Yes; C200H series Special I/O Unit, No.
CPU Bus Units: CS-series CPU Bus Unit, Yes 70261-1136 SGE-1510-0-4880A 00.
Current consumption: 5V system, 0.23A;
26 V system, --.
Standards: U, C, N, L, CE .
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control. Free change detection direction.
Detection direction can be according to the front, side (up and down, around 90 units) change.
Can be similar to the feeling of a limit switch installation.
Type: AC type.
Shape: shield.
Detection range: 15mm.
Action mode: NO/NC (toggle). Case color: Black.
Control output: Relay output.
Control mode *1: Standard or heating/cooling.
No. of auxiliary outputs: 2.
Detection of heater burnout, SSR failure, and heater overcurrent:
Detection for single-phase heaters.
No. of event inputs: --.
Transfer output *2: --.
Communi cations: --.
Previous model: Thermocouple input, --;
Resistance thermometer input, --.
New 48 x 24-mm Basic Temperature,
Controller with Enhanced Functions and,
Performance. Improved Indication Accuracy,
and Preventive Maintenance Function.
Indication Accuracy.
Thermocouple input: ±0.3% of PV (previous models: ±0.5%),
Pt input: ±0.2% of PV (previous models: ±0.5%),
Analog input: ±0.2% FS (previous models: ±0.5%),
Models are available with screw terminal blocks or screwless,
clamp terminal blocks.
A PV/SV-status display function can be set to automatically alternate,
between dispplayinng the status of the Temperature Controller (auto/
manual, RUN/STOP, and alarms) and the PV or SV 70261-1136 SGE-1510-0-4880A 00.
Preventive maintenance for relays in the Temperature,
Controller using a Control Output ON/OFF Counter.
Switch the PV display between three colorrs 70261-1136 SGE-1510-0-4880A 00.
Compatible with Support Software (CX-Thermo version 4.2 or higher).
Eleven-segment displays.
Models are available with one or two alarm outputs.
70261-1136 SGE-1510-0-4880A 00 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=70261-1136 SGE-1510-0-4880A 00&select=5