MITSUBISHI A1SJ71QC24N

Support network: DP PROFIBUS, DeviceNet.
Applicable models: GT27, GT25. Cable length: 0.7 meters
Extending cable to connect CPU main substrate and extended substrate,
According to the model can provide different cable length,
If you need to connect the AnN type expansion substrate is required,
Selection of A1SC05NB (A1SC07NB) cable . A pack of 20 A1SJ71QC24N.
Applicable models:
AJ65SBTC - - - type remote I/O module A1SJ71QC24N
AJ65VBTCU - - - type remote I/O module.
AJ65VBTCU- - type remote I/O module. Type: HA-FE series.
Rated output: 0.4KW.
Rated speed: 3000r/min.
Electromagnetic brake: No.
Control complex, easy to achieve intelligent,
The electronic commutation method is flexible and can be changed by square wave or sine wave A1SJ71QC24N.
Motor maintenance free, high efficiency, low operating temperature,
Electromagnetic radiation is very small, long life, can be used in a variety of environments.
AC servo motor is brushless motor, which is divided into synchronous and asynchronous motor,
Synchronous machines are commonly used in motion control,
Its power range, you can do a lot of power A1SJ71QC24N.
Large inertia, the maximum rotation speed is low, and with the increase of power and rapid reduction .
So it is suitable for the application of low speed and stable operation.
The rotor of the servo motor is permanent magnet,
Drive controlled U/V/W three phase electric electromagnetic field,
The rotor rotates under the action of the magnetic field,
At the same time the motor comes with the encoder feedback signal to the drive,
According to the feedback value and the target value, the driver is compared,
Adjust the rotor rotation angle.
The accuracy of the servo motor is determined by the accuracy of the encoder. Max input / output points: 16 points.
Supply voltage: 100 - 240VAC.
Input points: 8 points.
Output points: 8 points.
Output type: transistor.
Power consumption: 30VA.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x87.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data viaa modem communications
Paassword protection, using a eight digit password to protect your program A1SJ71QC24N.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application off tthe continuous scan time A1SJ71QC24N.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
A1SJ71QC24N Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=A1SJ71QC24N&select=5