MITSUBISHI AJ65VBTCU-68ADIN

Motor series: ultra low inertia, low power.
Rated output power: 0.1kw.
Rated speed: 3000r/min.
Whether to take the brake: No.
Shaft keyway: (open slot).
Protection level: IP55 does not include the shaft part and the connector.
Features: ultra low inertia is suitable for high frequency operation.
Application examples: the insertion device, the assembly machine AJ65VBTCU-68ADIN.
Length: 5 meters.
Operation panel or parameter unit connection line AJ65VBTCU-68ADIN Cable length: 0.5M.
Amplifier CC-Link interface unit cable.
For MR-J2S-11KA (4) MR-J2S-22KA to (4).
Amplifier and CC-Link interface unit using 0.5 m (1.64 ft) or shorter cables. The length of the line: 5M.
IP level: IP65.
Cable lead out direction: motor shaft different side AJ65VBTCU-68ADIN.
Bending life: high bending life.
The cable is not shielded.
Encoder with cable (motor side); for HF-KP/HF-MP series (motor shaft with side extraction). Motor series: low inertia, small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.1kw.
Rated speed: 3000rpm.
With the brake: without.
Shaft end: straight shaft AJ65VBTCU-68ADIN.
AC servo motor and brushless DC servo motor in the function of the difference: AC servo is better, because it is a sine wave control, torque ripple small .
DC servo is a trapezoidal wave. DC servo is simple and cheap. RS-485 communication adapter.
(need FX1N-8AV-BD).
(FX1S and FX1N host general). Input: 4 channels.
Thermocouple (K, J, T, B, S, E, R, N, U, L, PLlI, W5Re/W26Re,,).
No heater disconnection detection function.
Sampling period: 0.5s/4 channel.
18 point terminal station.
Peak current suppression.
Can prevent the simultaneous opening of the output to control the peak current, which is helpful for saving energy and reducing the operation cost.
Heating function at the same time.
The multiple loop can reach the set value at the same time to carry out the uniform temperature control,
Helps to prevent no-load and effective energy saving and reduce operating costs.
Automatic adjustment function.
The PID constant can be adjusted automatically in the control process.
Automatic adjustment of cost (time, material and electrical energy) can be reduced.
Can be flexible in various settings, to achieve the best temperature control of the temperature control module.
Equipment for high temperature control sstability of extrusiion molding machine,
The temperature regulating module has the function of preventing overheating and preventing over cooling AJ65VBTCU-68ADIN.
According to the control object device, select the standard control (heating or cooling) or the heating and cooling contrroll (heating and cooling) mode AJ65VBTCU-68ADIN.
In addition, the mixed control mode (combined with the standard control and heating - cooling control) can be selected.
AJ65VBTCU-68ADIN Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=AJ65VBTCU-68ADIN&select=5