Brand sort
MITSUBISHI DBU-22K-4
Brand:
MITSUBISHI
Country: JAPAN
Name:
Model: DBU-22K-4
Market price: U.S.$ 1318.64
(The following are the market open price not sales price!)
(The following are the market open price not sales price!)
next one: 
Last one: MITSUBISHI DBU-22K-4
The cable is required to diagnose the function using the MRConfigurator (servo setup software) amplifier.Total points: 10 points.
Input points: 6 points.
Output points: 4 points.
Voltage: AC220V.
Output type: relay.
Outline dimension: 60*75*90.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0 DBU-22K-4
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.Superior high efficiency IPM motor.
Output power: 7.5kw.
Rated speed: 1500r/min DBU-22K-4.
Voltage level: 200V .
IPM motor MM-EFS series can not be used to run the power frequency power.
The total wiring length of the IPM motor shall not exceed 100m.
1 inverters can not connect multiple IPM motors at the same time. Cable length: 2m.
For MR-J2S-700A (4) /CP/CL or less.
Encoder for HC-SFS; HC-LFS; HC-RFS; 2000r/min HA-LFS; HC-UFS servo motor.
-L represents bending life DBU-22K-4. "MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series .
Rated output: 0.2kw.
SSCNET interface.
Voltage: 3 phase AC200VAC or single phase AC230V.
Complete synchronization system with SSCNET high speed serial communication,
The communication cycle between the controller and the servo amplifier is the longest 0.888ms.
Such systems will be able to provide high reliability and high performance.
When connecting the servo system with SSCNET,
In the motion system, the parameters of the servo amplifier and the acquisition of the data will be displayed on the motion controller.
Connect a dedicated cable with an amplifier and a controller to foorm a SSCNET system DBU-22K-4.
This ssimple connection method reduces the routing time and helps to prevent noise .
Even in the MELSERVO-J2-SUPER series products using high resolution coding standards, the command frequency is no limit.
It is only necessary to add a battery on the servvo amplifier, which can form the absolute value system DBU-22K-4.
Currently there are more than 1000000 high reliability SSCNET servo amplifier networks in use. "
DBU-22K-4 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=DBU-22K-4&select=5
Input points: 6 points.
Output points: 4 points.
Voltage: AC220V.
Output type: relay.
Outline dimension: 60*75*90.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0 DBU-22K-4
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.Superior high efficiency IPM motor.
Output power: 7.5kw.
Rated speed: 1500r/min DBU-22K-4.
Voltage level: 200V .
IPM motor MM-EFS series can not be used to run the power frequency power.
The total wiring length of the IPM motor shall not exceed 100m.
1 inverters can not connect multiple IPM motors at the same time. Cable length: 2m.
For MR-J2S-700A (4) /CP/CL or less.
Encoder for HC-SFS; HC-LFS; HC-RFS; 2000r/min HA-LFS; HC-UFS servo motor.
-L represents bending life DBU-22K-4. "MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series .
Rated output: 0.2kw.
SSCNET interface.
Voltage: 3 phase AC200VAC or single phase AC230V.
Complete synchronization system with SSCNET high speed serial communication,
The communication cycle between the controller and the servo amplifier is the longest 0.888ms.
Such systems will be able to provide high reliability and high performance.
When connecting the servo system with SSCNET,
In the motion system, the parameters of the servo amplifier and the acquisition of the data will be displayed on the motion controller.
Connect a dedicated cable with an amplifier and a controller to foorm a SSCNET system DBU-22K-4.
This ssimple connection method reduces the routing time and helps to prevent noise .
Even in the MELSERVO-J2-SUPER series products using high resolution coding standards, the command frequency is no limit.
It is only necessary to add a battery on the servvo amplifier, which can form the absolute value system DBU-22K-4.
Currently there are more than 1000000 high reliability SSCNET servo amplifier networks in use. "
DBU-22K-4 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=DBU-22K-4&select=5
...more relevant model market price >>>>
Related products
Related download