MITSUBISHI FR-E740-7.5K-CHT

Power: 18.5kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor FR-E740-7.5K-CHT. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor FR-E740-7.5K-CHT
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Max input / output points: 64 points.
Supply voltage: 100 - 240VAC.
Input points: 32 points FR-E740-7.5K-CHT.
Output points: 32 points.
Output type: relay .
Power consumption: 60VA.
Weight (kg):1.20.
Size (WxHxD) mm:285x90x87.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module.
A total of 8 special function modules can be configured for each FX2n main unit FR-E740-7.5K-CHT.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017). MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 5.0kw.
Interface type: SSCNET type III fiber communication.
Full closed loop control.
Power specification: three phase AC400V.
High precision and high response location control.
Full closed loop control can be realized by double feedback control method.
Dual feedback control can be performed between the servo motor encoder and the load sside encoder FR-E740-7.5K-CHT.
MR-J3--B-RJ006 can be used in conjunction with a number of manufacturers of linear encoder,
Users can build the system according to their own accuracy requirements . ABS type linear encoder using serial interface,
No need to install the battery on the serrvoo amplifier can easily build the absolute position detection system FR-E740-7.5K-CHT.
Flexible system configuration.
Can achieve higher load side positioning accuracy!
FR-E740-7.5K-CHT Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=FR-E740-7.5K-CHT&select=5