MITSUBISHI GT15-80STAND

Motor: HA-SH type.
Power: 3.5kw.
Speed: 2000r/min.
The speed regulating motor can be divided into a constant speed motor, a stepless constant speed motor, a stepless speed changing motor and a stepless speed changing motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor GT15-80STAND.
The rotor speed of the induction motor is always slightly lower than that of the rotating magnetic field GT15-80STAND
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed. Servo motor series: low inertia, medium and large capacity.
Rated output: 11 GT15-80STAND. 0kw.
Rated speed; 1500r/min.
Electromagnetic brake: incidental .
Power supply: 400V.
Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment GT15-80STAND.
100 scene, there are 100 different drive control .
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products.
Can meet the different needs of different customers. Power: 30kw.
Purpose: to suppress the power harmonics.
Connected to the inverter input, can be used to improve the power factor, reduce the input side of the high harmonic current.
According to the motor power used to select AC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Output points: 8 points.
Output form: no public side (all points independent).
Rated output voltage: AC100 ~ 240V.
Max load current: 1A/1 point.
Common way: no public side (all points of independence).
Input / output occupied points: 16 points (I/O distribution: output 16 points).
External wiring connection: 18 point terminal.
1, the switch quantity acquisition and switch control and RS-485 bus are isolated from each other, and isolated from the whole system.
2, the power supply line has anti reverse connect function, once the wrong power line,
Will automatically cut off the power to protect the entire module is not damaged.
With over-voltage protection function, when the voltage is too high, automatic disconnection,
Protecting the entire module is not damaged.
3, RS-485 interface with 6600W lightning protectioon and surge protection function, with 3000V photoelectric isolation GT15-80STAND.
4, the use of Modbus protocol, good general, can be very convenient and other systems,
Customers can also according to their own personal needs, custom related agreements, convennieent and flexible GT15-80STAND.
5, communication lines using RS-485 bus, support for multiple modules in parallel use,
Easy to expand the system, good scalability.
GT15-80STAND Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=GT15-80STAND&select=5