JEMANET (OPCN-1) interface unit master station.
The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it,
Lag time, this is the time constant of the input circuit,
The time constant of the output circuit, the arrangement of the user statement and the use of the instruction,
The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on
HC-SFS702BG1 1/17
This phenomenon is called the I/O delay time effect.
Input status and input information input from the input interface,
CPU will be stored in the working data memory or in the input image register HC-SFS702BG1 1/17.
And then combine the data and the program with CPU .
The result is stored in the output image register or the working data memory,
And then output to the output interface, control the external drive. Cable length: 3m.
(for MR-J2S- / CP (1) -S084).
For MR-J2S-11KA (4) MR-J2S-22KA to (4). Servo motor series: low inertia, medium and large capacity.
Rated output: 6 HC-SFS702BG1 1/17. 0kw.
Rated speed; 3000r/min.
Electromagnetic brake: No .
Power supply: 400V.
Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
100 scene, there are 100 different drive control.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products.
Can meet the different needs of different customers. Input voltage range: AC100-240V.
Output voltage: DC5V/24V.
Output power: 0.6A.
Simplified program debugging.
Can use the software with the implementation of the conditions of the test function, any step in the program,
Changes the value of the soft component to a user specified value.
In the past, when debugging the specific loop process, the need to add a set of soft components of the program,
At present, through the use of the function, no need to change the program, you can make a specific loop program segment execution action.
Therefore, do not need to change the program separately in order to debug, debugging operation is more simple.
Through the expansion of soft components, more convenient to create the program.
M soft components and B soft components can be expanded to 60K points, making the program easier to understand.
Auto backup key data.
Save the program and parameter files automatically to the program memory (ROM Flash) without usinng the backup batteery,
To prevent the loss of the program and the parameters due to forgetting to replace the battery HC-SFS702BG1 1/17.
In addition, the soft component data and other important data can be backed up to the standard ROM,
In order to avoid during the long holiday and oothher planned downtime,
The data is lost due to battery depletion HC-SFS702BG1 1/17.
The next time the power is turned on, the backup data will be automatically restored.
HC-SFS702BG1 1/17 Operation manual / Instructions / Catalog download link:
/searchDownload.html?Search=HC-SFS702BG1 1/17&select=5