MITSUBISHI MR-BKCN

Power: 3.7kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current.
Make sure that this option is installed in the FR-A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity.
At the same time the installation options in the use of 75kW and above motor MR-BKCN. (the IP55 series has a built-in DC reactor.)
According to the motor power used to select the DC reactor MR-BKCN
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Cable length: 30 meters.
For QCPU and GOT (need A9GT-QCNB) connection.
For the connection between GOT and GOT. A set of 5 (LOGO removable, man-machine interface provides one) MR-BKCN.
Applicable model: A956WGOT. Type: HA-ME series.
Rated output: 0.75KW.
Rated speed: 3000r/min.
Electromagnetic brake: No.
Control complex, easy to achieve intelligent,
The electronic commutation method is flexible and can be changed by square wave or sine wave.
Motor maintenance free, high efficiency, low operating temperature,
Electromagnetic radiation is very small, long life, can be used in a variety of environments MR-BKCN.
AC servo motor is brushless motor, which is divided into synchronous and asynchronous motor,
Synchronous machines are commonly used in motion control,
Its power range, you can do a lot of power.
Large inertia, the maximum rotation speed is low, and with the increase of power and rapid reduction.
So it is suitable for the application of low speed and stable operation.
The rotor of the servo motor is permanent magnet,
Drive controlled U/V/W three phase electric electromagnetic field,
The rotor rotates under the action of the magnetic field,
At the same time the motor comes with the encoder feedback signal to the drive,
According to the feedback value and the target value, the driver is compared,
Adjust the rotor rotation angle.
The accuracy of the servo motor is determined by the accuracy of the encoder. MR-J2M multi axis servo amplifier substrate.
Groove position: 8.
There are many methods for the classification of servo system, and there are three kinds of common classification methods.
(1) classification of parameters of controlled parameterrs MR-BKCN.
(2) according to the typee of drive components .
Servo control system according to the type of control components can be divided into mechanical and electrical servo system, hydraulic servo system (hydraulic control system) and pneumatic servo system.
(3) according to the cconntrol principle MR-BKCN.
Servo system can be divided into open loop servo control system, closed loop control servo system and semi closed loop servo system.
MR-BKCN Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=MR-BKCN&select=5