MITSUBISHI MR-J2S-10A-S075

Input type: DC input, positive public end / negative public end.
Input points: 2 points.
Enter the response time: 1.5ms the following.
Rated input voltage / current: DC24V/4mA.
Output form: relay output.
Output points: 2 points.
OFF leakage current: -.
Output protection function: No.
Rated load voltage / current: DC30V/AC250V/2A .
External connection: 2 line /2 line type MR-J2S-10A-S075.
Screw terminal table type MR-J2S-10A-S075
Minimum size of industry.
The connection object at a glance with terminal cover plate.
Input module for public end of positive pole and negative pole.
Terminal table structure capable of connecting with 2 wire type sensor and load in the same condition MR-J2S-10A-S075.
Can be installed along the 6 direction. Application: extension .
Suitable for safety standards: EN954-1 class 4, PLe ISO13849-1.
Security input points: 1.
Use special setting monitoring tools to configure the configuration directly.
Constitute a rich set of components can be easily and quickly set the hardware structure.
Creating logic for security devices, by using the automatically generated labels of the FB can easily create logic MR-J2S-10A-S075.
Logical import and export .
You can store the connection settings of the input and output modules and the application logic created by the function block as a setting file,
Or read from a saved set file. QCPU (Q mode) bus connection.
1 joint.
Applicable model: A956WGOT. Power: 185kw.
Purpose: to suppress the power harmonics.
Connected to the inverter input, can be used to improve the power factor, reduce the input side of the high harmonic current.
According to the motor power used to select AC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Type: HC-PQ type.
Output power: 0.2kw.
Rated speed: 3000r/min.
Electromagnetic brake: No.
Key axis: D type shaft.
Motor aspects: the material, structure and processing technology of the servo motor is much higher than that of AC motor,
That is when the driver output current, voltage, frequency change is fast power supply,
The servo motor can change according to the change of the response of the power supply,
Response characteristics and anti overload capacity is much higher than the AC motor drive,
Motor aspects of the serious differences between the two aare fundamentally diffferent performance MR-J2S-10A-S075.
That is not the inverter output can not change so fast power signal,
But the motor itself can not react,
So in the frequency of the internal algorithm set to protect the motor to do the corresponding overload.
Of course, even wwitthout the ability to set the output of the inverter is limited,
Some of the excellent performance of the inverter can be directly driven servo motor MR-J2S-10A-S075.
MR-J2S-10A-S075 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=MR-J2S-10A-S075&select=5