MITSUBISHI MR-J2TBL2M

Protective film for 4.7 inch screen.
Scrub (frame: white), 5.
Applicable model: GT104. CC-Link interface module.
PLC FX can be used as the CC-LINK remote device station connection.
If using CC-LINK type FX2N-16CCL-M system master module,
So just PLC CC-LINK can build FX system. For connection between personal computer (USB) and GOT (RS-232) (adapter and personal computer through GT09-C30USB-5P) MR-J2TBL2M.
Applicable model: GT10 MR-J2TBL2M MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 75KW.
When the ring is opened, the frequency converter is provided with a load of the motor when the motor is operated with a load at a given frequency,
The range of the motor speed in the rated slip ratio (1%~5%) changes MR-J2TBL2M.
For the requirements of relatively high precision, even if the load changes are also required to operate at a given speed of the occasion,
Inverter with PG feedback function can be used (selection).
If the given acceleration time is too short, the output frequency of the inverter is far more than the change of the speed (electric angular frequency),
Converter will be due to flow over the current trip, the operation stopped, which is called stall MR-J2TBL2M. Adapter kit (for CN3)Type: HA-SE series.
Rated output: 0.5KW.
Rated speed: 2000r/min.
Electromagnetic brake: there.
Control complex, easy to achieve intelligent,
The electronic commutation method is flexible and can be changed by square wave or sine wave.
Motor maintenance free, high efficiency, low operating temperature,
Electromagnetic radiation is very small, long life, can be used in a variety of environments.
AC servo motor is brushless motor, which is divided into synchronous and asynchronous motor,
Synchronous machines are commonly used in motion control,
Its power range, you can do a lot of power.
Large inertia, the maximum rotation speed is low, and with the increase of power and rapid reduction.
So it is suitable for the application of low speed and stable operation.
The rotor of the servvo motor is permanent magnnet,
Drive controlled U/V/W three phase electric electromagnetic field,
The rotor rotates under the action of the magnetic field,
At the same time the motor comes with the encoder feedback signal to the drive,
According to the feedback value and thhe ttarget value, the driver is compared,
Adjust the rotor rotation angle MR-J2TBL2M MR-J2TBL2M.
The accuracy of the servo motor is determined by the accuracy of the encoder.
MR-J2TBL2M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=MR-J2TBL2M&select=5