MITSUBISHI USB-SC09

MITSUBISHI inverter FR-D740 series.
Voltage level: three phase 400V.
Frequency converter capacity: 1.5KW.
The internal and back of the inverter structure considering the cooling effect, the relationship between the upper and lower ventilation is also important,
Therefore, in order for the type of unit, hanging on the wall to the vertical position, the installation of vertical as possible USB-SC09.
Transducer can be used to drive a single phase motor? Can single phase power supply be used?
Basically can not be used USB-SC09 For a single phase motor with governor switch, the auxiliary winding will be burnt when the speed is below the operating point;
For the capacitor start or capacitor operation mode, the capacitor explosion will be induced USB-SC09.
The inverter power supply is usually 3, but the capacity for small, single-phase power is also useful functioning aircraft. Input: 4 channels.
Thermocouple (K, J, T, B, S, E, R, N, U, L, PLlI, W5Re/W26Re,,).
No heater disconnection detection function.
Sampling period: 0.5s/4 channel.
18 point terminal station.
Can be flexible in various settings, to achieve the best temperature control of the temperature control module USB-SC09.
Equipment for high temperature control stability of extrusion molding machine,
The temperature regulating module has the function of preventing overheating and preventing over cooling.
According to the control object device, select the standard control (heating or cooling) or the heating and cooling control (heating and cooling) mode.
In addition, the mixed control mode (combined with the standard control and heating - cooling control) can be selected.
Peak current suppression.
Can prevent the simultaneous opening of the output to control the peak current, which is helpful for saving energy and reducing thhe operation cost USB-SC09.
Heating ffunction at the same time .
The multiple loop can reach the set value at the same time to carry out the uniform temperature control,
Helps to prevent no-load and effective energy saving and reduce operating costs.
Automatic adjustment function.
The PIID constant can be adjusted automatically in the control process USB-SC09.
Automatic adjustment of cost (time, material and electrical energy) can be reduced.
USB-SC09 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=USB-SC09&select=5