OMRON ZS-LD80 0.5M

Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: SJT(O) cable *3.
Actuator: Plastic rod.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models . )
Sealing characteristics that meet IEC IP67 degree of protection ZS-LD80 0.5M.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material ZS-LD80 0.5M
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables ZS-LD80 0.5M.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Release Protective Cover Locks Using.
Controller Signals or Pushbutton.
Switches after the Cutting Tool Stops ZS-LD80 0.5M.
Moving Due to Inertia.
A mechanical lock is applied automatically when the Operation .
Key is inserted. A high level of safety is achieved using a,
mechanism where the lock is only released when voltage is,
applied to the solenoid.
Conforms to EN (TÜV) standards corresponding to the CE marking.
Certified by UL, CSA and CCC standards.
The Switch contact is opened by a direct opening mechanism,
(NC contacts only) when the protective cover is opened.
Direct opening mechanism that is EN-certified is indicated by,
on the Switch.
Auxiliary release key ensures easy maintenance and unlocks the,
door in the case of a power failure.
Tough aluminum die-ccast body incorporating a switch box with,
degree of protection satisfying IP67, UL, and CSA TYPE6P, 13 ZS-LD80 0.5M.
Equipped with a horizontal and vertical conduit opening.
Models incorporating easy-to-see indicators for monitoring and,
those using an adjustable Operation Key fforr a swinging door are available ZS-LD80 0.5M.
The mounting direction of the head can be changed,
to allow the Operation Key to be inserted from four directions.
ZS-LD80 0.5M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=ZS-LD80 0.5M&select=5