OMRON E2A-M30KN20-M1-C2

Insulation method: Phototriac.
Operation Display: Yes(green).
Output(SSR): AC.
Zero cross Function: Yes.
Rated output Load: 2 A(at 100 to 240 VAC).
Rated input voltage (socket): 24 VDC, 24 VAC/VDC.
Applicable model: G3RV-SR700/500-A DC24V, G3RV-SR700/500-A AC/DC24V.
Global standard size,
low profile slim I/O relay with width 6 . 2 mm,
slim I/O solid state relay E2A-M30KN20-M1-C2.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel E2A-M30KN20-M1-C2
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals E2A-M30KN20-M1-C2. ).
No screw loosening means maintenance-free application,
realizing high reliability .
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange E2A-M30KN20-M1-C2. Size: 48 x 24mm.
Control output 1: voltage output (SSR driver) .
Control output 2:--.
Auxiliary output: 2 points.
Power supply voltage: AC100 ~ 240V.
Terminal type: screw terminal table type (with terminal cover).
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: -.
Event input: 1 points.
A small body of 48 * 24mm specifications on the condensation operation, E5_C series of high performance.
Slender body width 48mm * 24mm * 90mm high depth,
The most suitable for small devices / physical and chemical equipment, etc..
Although the small size, but also through the character of the high 10.5mm white PV display to achieve high recognition.
The terminal stage is adopted to disassemble and assemble the structure, which improves thhe maintenance perfformance E2A-M30KN20-M1-C2.
The connection method can be selected from a screw terminal and a PUSH-IN fastening terminal.
High speed sampling of 50ms is realized.
Easy to connect with PLC through no program communication.
The use of electric communication converrsiion Village (sold separately) connected to the computer after,
No power connection can be set E2A-M30KN20-M1-C2.
It can be easily set by CS-Thermo (sold separately).
E2A-M30KN20-M1-C2 Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E2A-M30KN20-M1-C2&select=5