OMRON E2B-M18LS05-WZ-C1 5M

Size: M18, Non-shielded.
Sensing distance: 16.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 61 (81).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor E2B-M18LS05-WZ-C1 5M.
Problems such as the collision of workpieces are eliminated E2B-M18LS05-WZ-C1 5M
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: Unshielded, M12.
Sensing distance: 8 mm.
Model: Operation mode, NC.
Proximity Sensor with a Long Screw Length E2B-M18LS05-WZ-C1 5M.
Increased tightening strength . Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: non shield, M18 E2B-M18LS05-WZ-C1 5M.
Detection range: 14mm.
Action mode: NO. Actuator: Roller lever (Metal lever, resin roller) .
Cable length: 5 m.
Pull-outing direction of cable: Horizontal.
Built-in switch: 2NC/2NO (slow-action).
Smallest Class of Safety Limit Switches the World.
The world''s smallest limit switch with a direct opening,
mechanism (four-contact construction model).
High-sensitivity safety limit switch.
Built-in switches with two- or four-contact construction are available.
Degree of protection: IP67.
Conforms to EN115-1, EN81-1 and EN81-2.
(slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 60 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achievedd through optimuum design of heat sink E2B-M18LS05-WZ-C1 5M.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply witth VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load E2B-M18LS05-WZ-C1 5M.
Certified by UL, CSA, and VDE (reinforced insulation).
E2B-M18LS05-WZ-C1 5M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E2B-M18LS05-WZ-C1 5M&select=5