OMRON E2EH-X12B1 2M

Type: rectangle.
Screen mode: 2 short axis segmentation.
Light way: LED.
Power supply voltage: DC24V.
Operating part left color: blue.
Operating Department right color: yellow.
Square 40mm body of the indicator light series.
The same type as the A3S series button switch.
Easy to install from the front panel and no tools to carry out the lamp replacement E2EH-X12B1 2M. Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A) E2EH-X12B1 2M
Operation: Alternate operation (Self-holding).
Case color: Light gray.
Output: SPDT.
Lighting: LED; 5 VDC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness E2EH-X12B1 2M.
Three-color models (green, orange, red; chameleon lighting).
included in lineup. Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed roller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement E2EH-X12B1 2M.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Sensing method: Distance-settable(BGS Models).
Connection method: Pre-wired (2 m).
Response time: 1 ms.
Sensing distance: 125 to 40 mm (Min. distance set),
25 to 300 mm (Max. distance set) .
Model: PNP output .
Compact and Reliable,
Laser Photoelectric Sensor.
Safety and reliability with laser class 1 (JIS and IEC).
Product lineup includes models with distance setting without,
influence of color.
Maximum ambient operating temperature of 55°C and water,
proof construction in E3Z class.
Type of input: AC voltage input.
Output type: relay contact; 1c H; PASS, L: each 1c.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) some models are not equipped wiith depth E2EH-X12B1 2M.
The most suuitable voltage and current signal simulation, measurement and display, identification of the panel table .
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the opperration trend E2EH-X12B1 2M.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.
Depth (panel
E2EH-X12B1 2M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E2EH-X12B1 2M&select=5