OMRON E6C4-CWZ5G 600P/R 0.5M

Actuator: Roller lever: R50.
Indicator: Neon lamp.
Item: Basic.
Pretravel (PT): 15±5°.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches .
Standard-feature gold-clad crossbar contacts provide high reliability E6C4-CWZ5G 600P/R 0.5M
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models E6C4-CWZ5G 600P/R 0.5M. Model: C200HW-BI031 .
No. of I/O slots: 3 slots.CV500-BS CPU Bus Unit BASIC Unit CV500-BSC21
RS-232C: 2 ports, RS-422: 1 port.The use of the connector terminal greatly reduces the wiring operation.
Using a press connector to realize single contact wiring.
The installation of the switch is a single contact type quick fit.
Bidirectional movement type with free installation direction E6C4-CWZ5G 600P/R 0.5M. Compact (Two-, Three-, or Four-digit) S2-series,
Added to Static Mother Board .
Models.
Easily connect a M7E Digital Display without soldering.
Two-, three- and four-digit Mother Boards are available for,
connecting M7E Digital Displays and, by using two Mother,
Boards, two- to eight-digit displays are possible.
The depth of the Mother Board with M7E Digital Display,
Units is only 58 mm, ideal for mounting to compact or thin control panels.
Connecting to OMRON''s PLCs via dedicated PLC cables,
(sold separately) (refer to M7E Options). A collection of shell: the shell embedded R2 shell.
Purpose: high voltage non grounding system.
Static ground directional relay K2GS-B type,
Advanced ground direction relay corresponding to the diversification of ground fault.
Feeder priority cut-off function for coordinated multi segment setting.
Prevention of low frequency vibration with other circuit accidents,
Circuit for locking circuit and preventing effect of electric wave caused by false action,
In orrder to improve the reliability E6C4-CWZ5G 600P/R 0.5M.
The coordination device for the zero phase action voltage is set up,
Therefore, the influence of the residual voltage can be avoided.
Due to the built-in filter, so in the event of the occurrence of the ramp wave innpuut can also maintain a stable role,
Because of the signal level detection, it is easy to carry out the action experiment and set up the confirmation E6C4-CWZ5G 600P/R 0.5M.
E6C4-CWZ5G 600P/R 0.5M Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=E6C4-CWZ5G 600P/R 0.5M&select=5