OMRON F3SJ-B0705P25-S

Type of input: AC current input.
Output type: no output.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table F3SJ-B0705P25-S.
Action determine the color, can switch the green / Red 2 kinds of color display F3SJ-B0705P25-S
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type F3SJ-B0705P25-S.
The depth (panel below) is only short size 95mm .
ULIsolation method: Relay.
Zero cross function: No.
Operation indicator: Yes.
Applicable output load(See note.): 10 A 100 to 240 VAC.
Rated input voltage: 24 VDC.
Hybridization of a Magnetic Relay and an,
SSR Achieves 10-A Switching for 10 Million,
Operations.
UL/CSA certified (-VD models).
Using a triac to open and close the circuit reduces chattering,
and arching, thereby increasing the electrical durability to 10,
million operations F3SJ-B0705P25-S.
Relays contacts for power ON and 10-A switching with high,
capacity are provided in a compact body without the need of,
radiators. Plus, there is almost no effect on heat generation,
or ambient temperature.
Operation indicators to easily check operation.
Built-in temperature fuse prevents internal burning due to,
triac or relay malfunctions.
Socket-type Relays the same size as the 1-pole and 2-pole,
LY Relays. Size: M12 (Brass); Single; Unshielded.
Sensing distance: 20 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Long.
Output configuration: NPN.
Operation mode NC.
A new generation in global applications. Application: General applications for purified water, For 3-pole electrode.
Separate Electrode Holders for Water.
Supply and Drainage Control in Builddings F3SJ-B0705P25-S.
Small, Lightwweight Electrode Holders for,
Use as Built-in Components .
The PS-@S(R) are separate Electrode Holders that allow the,
Electrodes to be withdrawn easily for inspection.
The PS-@S(R) come in 3, 4, or 5 pole models for supply and,
drainage of tapp wwater in buildings F3SJ-B0705P25-S.
PS-31 is a small and light-weight Electrode Holder that is,
suitable for installation in limited space and built-in components.
F3SJ-B0705P25-S Operation manual / Instructions / Catalog download link: /searchDownload.html?Search=F3SJ-B0705P25-S&select=5