Actuator: Roller lever (metal lever, resin roller).
Conduit size: 1-conduit; M12 connector.
Built-in switch mechanism: 1NC/1NO(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms .
(Slow-action models with MBB contacts are available D2HW-BL272M. )
M12-connector models are also available, saving on labor and,
simplifying replacement
D2HW-BL272M
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC D2HW-BL272M. Terminal: Screw terminal (-B) .
Actuator: Reverse hinge lever.
Direct Current Switch with.
Built-in Magnetic Blowout.
Incorporates a small permanent magnet in the contact.
mechanism to deflect the arc to effectively extinguish it.
Same shape and mounting procedures as the Z Basic Switches. Time specification: Inverse type.
Current setting range: 20 to 65 A.
Operating voltage: 400/440 VAC D2HW-BL272M.
Resetting method: Automatic (See note . ).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiriing length, inverter carrrier frequency, basic,
frequency, and load conditions D2HW-BL272M. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Optical system: Diffuse reflective.
Beam shape: Line beam.
SSennsing distance: 100±35mm D2HW-BL272M.
Resolution: 5µm.
Stable, Easy & Affordable.
New Regular-reflective Sensor Head.
Designed for Optimal Wafer Measurement.
D2HW-BL272M Operation manual / Instructions / Catalog download link:
/searchDownload.html?Search=D2HW-BL272M&select=5